變速箱維修過程中內部組件的再檢怎么做？實際上小總成組裝是對變速箱維修過程中內部組件的再檢和調整，為總成總成裝配的前一道工序，下面
濟南變速箱維修人員來講講其作業內容包含什么吧。
How to recheck the internal components during gearbox maintenance? In fact, the assembly of small assembly is the re inspection and adjustment of internal components during the gearbox maintenance process. As the previous process of assembly, the Jinan gearbox maintenance personnel will talk about what the work includes.
油泵的組裝和檢測
Assembly and inspection of oil pump
離合器的組裝和間隙調整檢測
Clutch assembly and clearance adjustment inspection
換檔機構的組裝調整檢測
Assembly, adjustment and inspection of shift mechanism
閥體的組裝檢測
Assembly inspection of valve body
差速器的組裝調整檢測
Differential assembly, adjustment and inspection
行星齒輪機構的組裝調整
Assembly and adjustment of planetary gear unit
密封件的保持壓力測試
Sealing element holding pressure test
總成組裝是裝配后一道工序,需要在特殊的工作環境中完成所有組件的位置間隙預緊力等都須嚴格按照技術規范進行操作總成裝配完畢后還要進行靜態壓力測試，在達到技術標準后才可以進入下一道工序
Assembly is a process after assembly. It is necessary to complete the position, clearance and preload of all components in a special working environment. The operation must be carried out in strict accordance with the technical specifications. After assembly, the static pressure test must be carried out. The next process can only be started when the technical standards are met
總成動態測試是通過測試臺模擬汽車的工作對變速箱進行動態測試通過模擬測試可以檢測變速箱的各種工作性能，如各種油壓數據是否符合技術規范，入檔，升檔，降檔是否平順，鎖止離合器結合釋放是否符合要求，是否達到既定的轉速，變速箱的冷卻流量是否達到標準范圍，變速箱運轉噪音是否符合要求等等所有測試數據都要進行記錄并與標準進行對比，符合要求后才能交付客戶裝車使用。
The dynamic test of the assembly is a dynamic test of the gearbox by simulating the work of the vehicle on the test bench. Through the simulation test, various working performances of the gearbox can be detected, such as whether various oil pressure data meet the technical specifications, whether the gear in, gear up and gear down are smooth, whether the lock clutch engagement and release meet the requirements, whether the given speed is reached, and whether the cooling flow of the gearbox reaches the standard range, Whether the running noise of the gearbox meets the requirements, etc. All test data shall be recorded and compared with the standard, and can be delivered to the customer for loading and use after meeting the requirements.
變速箱維修過程中內部組件的再檢怎么做？以上就是問題的相關解答內容了，您有什么疑惑或者需求，歡迎來我們網站
http://m.5918bqq.cn進行咨詢了解！
How to recheck the internal components during gearbox maintenance? The above is the answer to the question. If you have any questions or needs, please come to our website http://m.5918bqq.cn Ask about it!
